Description

JOSOI Ring-LED High-Speed Handpiece

• Brand: JOSOI — professional high-speed dental handpiece for routine clinical use
• Ring LED illumination for wide, shadow-reduced visibility around the bur tip
• Five-point water spray cooling system for stronger cooling coverage during high-speed cutting
• Metal body structure for durability and repeated clinical sterilization
• Push-button bur release for fast, convenient bur replacement
• Available with 2-hole and 4-hole connection interfaces
• 320,000–350,000 RPM high-speed turbine performance
• Low operating noise level of ≤60 dB
• Compatible with Φ1.595–1.600 mm standard dental burs
• Supports 135°C high-temperature autoclave sterilization

[Send Inquiry]

---

Description

The JOSOI Ring-LED High-Speed Handpiece is designed for dental clinics that require bright operative visibility, stable high-speed cutting performance, and efficient cooling during daily treatment procedures.

This model features an integrated ring-style LED lighting system around the head area, helping provide broader illumination near the bur tip compared with single-point lighting. The ring light design improves visibility from multiple angles and helps reduce shadow interference during cavity preparation, crown reduction, restorative adjustment, and other procedures requiring precise visual control.

The handpiece is equipped with a five-point water spray cooling system, which directs cooling water toward the cutting area from multiple positions. This helps reduce heat buildup during high-speed operation and supports cleaner cutting by washing away debris around the bur and tooth surface.

With a working air pressure of 0.22–0.25 MPa and a speed range of 320,000–350,000 RPM, the JOSOI Ring-LED High-Speed Handpiece provides efficient turbine performance for routine clinical applications. Its metal housing, push-button bur release, 2-hole / 4-hole interface options, and 135°C autoclave compatibility make it a practical and reliable instrument for modern dental practices. Product specifications are based on the uploaded product document.

---

Feature

• The ring LED illumination system provides bright light around the head area, improving visibility at the bur tip and helping clinicians observe preparation margins, tooth surfaces, and working angles more clearly.
• Compared with a single LED point, the ring light design offers wider light distribution, helping reduce directional shadows during angled cutting and improving visual consistency throughout the procedure.
• The five-point water spray cooling system delivers water from multiple directions around the bur, helping control temperature more effectively during high-speed cutting.
• The multi-point spray pattern also assists in removing tooth debris and restorative particles from the operative field, supporting a cleaner and more visible working area.
• The push-button bur release allows quick bur replacement without additional tools, improving chairside efficiency and simplifying clinical workflow.
• The metal body provides strong structural stability, good durability, and resistance to repeated cleaning and sterilization cycles.
• The 2-hole and 4-hole connection options allow the handpiece to be used with common dental unit interfaces.
• The low noise level of ≤60 dB supports a more comfortable operating environment for both clinicians and patients.

---

JOSOI Ring-LED High-Speed Handpiece — Specifications

---

Working Principle

The JOSOI Ring-LED High-Speed Handpiece operates through a pneumatic turbine system. Compressed air enters through the 2-hole or 4-hole connection interface and drives the internal turbine rotor. Under the recommended working air pressure of 0.22–0.25 MPa, the turbine rotates at 320,000–350,000 RPM to power the dental bur for high-speed cutting.

The bur is secured by the push-button chuck mechanism. When the turbine reaches operating speed, the bur removes tooth structure or restorative material through high-speed rotation. The push-button system allows the clinician to replace the bur quickly after the turbine has fully stopped.

The integrated ring LED system provides illumination around the head area and directs light toward the cutting zone. This helps improve visibility around the bur tip, especially when the handpiece is used at different angles inside the oral cavity.

At the same time, the five-point water spray system delivers cooling water from multiple outlets around the head. This multi-directional spray helps reduce thermal buildup, cool the bur and tooth surface, and flush away debris during cutting. The combination of ring LED illumination and five-point cooling supports safer, clearer, and more efficient clinical operation.

---

Clinical Practice of the JOSOI Ring-LED High-Speed Handpiece

1. Pre-Operative Setup

• Inspect the handpiece body, head, LED light area, spray outlets, and connection interface before use.
• Confirm that the selected bur has a shank diameter of Φ1.595–1.600 mm.
• Insert the bur fully into the chuck and confirm secure retention before operation.
• Connect the handpiece to the appropriate 2-hole or 4-hole dental unit interface.
• Check that the working air pressure is within the recommended range of 0.22–0.25 MPa.
• Run the handpiece unloaded for several seconds before intraoral use to confirm stable rotation, LED illumination, five-point water spray output, and normal operating sound.

2. Intraoperative Management

• Use the ring LED illumination to improve visibility during cavity preparation, crown reduction, margin refinement, and restorative adjustment.
• Maintain controlled hand pressure during cutting. Excessive force may reduce turbine efficiency, increase heat generation, and shorten the service life of the handpiece.
• Keep the five-point water spray active during high-speed cutting to reduce thermal damage and improve debris clearance.
• Adjust the handpiece angle as needed while using the wide LED illumination to maintain clear observation of the operative field.
• Monitor the operating noise during use. Normal operation should remain at or below 60 dB.
• Stop operation immediately if abnormal vibration, unstable bur rotation, reduced spray output, or unusual sound occurs.
• Replace burs only after the turbine has fully stopped.

3. Post-Operative Maintenance

• Remove the bur after the procedure using the push-button release.
• Flush the handpiece air and water lines after use to remove residual water, debris, and contaminants.
• Clean the external surface of the handpiece, especially around the head, ring LED area, spray outlets, and connection interface.
• Check the five-point spray outlets regularly to prevent blockage and maintain balanced cooling performance.
• Lubricate the handpiece according to the manufacturer’s maintenance protocol before sterilization.
• Sterilize the handpiece using 135°C high-temperature autoclave sterilization.
• After sterilization, allow the handpiece to dry completely before storage or reuse.

---

The Function of the JOSOI Ring-LED High-Speed Handpiece

The JOSOI Ring-LED High-Speed Handpiece is used for high-speed dental cutting in routine clinical procedures. Its primary function is to drive standard dental burs at 320,000–350,000 RPM for cavity preparation, crown preparation, restorative adjustment, occlusal reduction, and other procedures requiring efficient removal of tooth structure or restorative material.

The ring LED lighting system improves the clinician’s ability to see the operative field clearly. Because the light is distributed around the head area, it helps reduce the effect of directional shadows and supports better visibility when the bur angle changes during treatment.

The five-point water spray system is another key functional feature. During high-speed cutting, friction can quickly generate heat. The multi-point cooling spray helps control temperature around the bur and tooth surface, reducing the risk of thermal irritation while improving patient comfort.

The metal body and push-button bur release make the handpiece suitable for repeated daily clinical use. The metal housing provides structural strength, while the push-button system allows fast bur changes and efficient chairside workflow.

---

Important Notes for Using the JOSOI Ring-LED High-Speed Handpiece

1. Always confirm that the working air pressure is within 0.22–0.25 MPa before operation.
2. Use only burs with a shank diameter of Φ1.595–1.600 mm.
3. Do not operate the handpiece without a bur properly installed.
4. Always use water spray during cutting to prevent excessive heat buildup.
5. Check all five water spray outlets regularly. Blocked outlets may reduce cooling efficiency and affect clinical safety.
6. Do not press the push-button bur release while the turbine is still rotating.
7. Inspect the ring LED light before each use. If the light becomes weak, unstable, or fails to illuminate, check the handpiece before clinical operation.
8. Clean the head area carefully after use, especially around the LED and spray outlets.
9. Lubricate the handpiece according to the recommended maintenance procedure before sterilization.
10. Sterilize the handpiece at 135°C using high-temperature autoclave sterilization.
11. After sterilization, inspect the handpiece for abnormal noise, vibration, reduced spray output, LED failure, or visible damage before reuse.